中文
EnglishHow to distinguish the quality of single fireproof glass?
1. Equipment conditions:
No matter how to make a single piece of fireproof glass, it can't be done without some equipment, so if the manufacturer doesn't have the equipment, it can't make fireproof glass.
2. Particle size of glass
If a single piece of fireproof glass is broken, its particle size is small and the number is large, which is far greater than the requirement of 40 particles within the range of 50 * 50mm in the national standard. If there are only dozens of particles, it is generally only tempered glass, not to mention 40 particles.
3. Check the internal stress of glass
Internal stress, the national standard doesn't say how much the internal stress of fireproof glass should be, but experts know.
In addition, glass of equal size and thickness can be separated by the feeling of hands, which varies from person to person.
4. The latter move: the composition of glass is different, the particle size and stress are also different, so the national standard does not clarify how much it should be. We can only rely on experience and advocate the selection of large manufacturers and manufacturers with a long history before production and development.
Article source: monolithic fireproof glasshttp://www.hongye168.cc/
-
05-04
What are the problems of composite fireproof glass in fire fighting
Some supervisors mistakenly think that the door made of fireproof glass is the fireproof door, the partition made of fireproof glass is the fireproof glass partition, and the window made of fireproof
-
04-12
Fireproof glass door: how to ensure that the fireproof door can play a role in critical times
How to ensure that the fire door can give full play to its ideal effect in critical time?1. Select appropriate typesAccording to the relevant specific introduction of fire doors, we can know that at t
-
02-17
Where is the fireproof glass generally installed
(1) the fireproof glass is generally installed on something. It may not be checked from time to time before installation. If the warpage, unsightness and glass hazards of the window edge and window ar
-
10-30
How to distinguish the quality of single fireproof glass?
1. Equipment conditions:No matter how to make a single piece of fireproof glass, it can't be done without some equipment, so if the manufacturer doesn't have the equipment, it can't mak